| It is used to collect samples from raw materials, intermediate products, fuels and final products in powder and granule form in industrial plants at certain time intervals. Depending on the place to be sampled and the physical properties of the sample to be taken, it is designed as a sampler on the conveyor belt, an air in-belt sampler and a shovel-type sampler from pouring chutes. |
 |
|
1.SAMPLER ON CONVEYOR BELT
It is used to collect samples from the flowing material carried on the belt conveyor. Sampling shovel and rotational speed are set according to the desired sample amount, and samples are taken from the belt as much as the required amount in one go. Samplers produced by KILINC INDUSTRY;
It can take samples from conveyor belts between 500 mm and 1600 mm width, in the capacity range of 1 t/hour to 1000 t/hour and speeds up to 6 m/second. It is used in Cement, Mining and Chemical plants, especially Coal Power Plants.
|
|
Advantages and Equipment;
- Easy assembly to the existing conveyor chassis thanks to its compact structure,
- Automatic sampling according to the belt speed,
- Capability to collect samples in different amounts,
- Insulating parts that prevent uncontrolled material spillage,
- Sampling even in different feed material sizes,
- IP65 protected panel,
- Automatic and precise operation thanks to PLC system,
- Profibus communication infrastructure.
|
 |
|
2. AIR BELT SAMPLER
The Air Belt Sampler, mounted on the air belt line as a 1mt module, allows sampling of the desired amount without affecting the overall air and material flow balance of the transport system. The pneumatic driven system produced by KILINC INDUSTRY activates the sampling mechanism at the times set and ensures homogeneous sampling from the material passing through the pneumatic belt and transferred to the transport container. The equipment produced for air belt modules in the range of 200 - 500mm in general can be designed vertically or horizontally upon request, and it is frequently used in lines carrying powder material in cement and mining facilities.
Advantages and Equipment;
- Modular and counter flanged production for ease of installation in the system,
- Durable pneumatic drive system,
- Insulation parts preventing dusting,
- Standard maintenance cover for easy maintenance and control,
- IP65 protected panel,
- Automatic and precise operation thanks to programmer system,
- Profibus communication infrastructure.
|
 |
|
3. SHOVEL SAMPLER
Such samplers are designed to collect samples from the spill points. The material taken from the pouring chute with the help of the sampling shovel is transferred to the sample container during the transfer of the materials conveyed by the transport equipment to the other equipment. It is produced with pneumatic or electric motor drive option according to the suitability of the place to be sampled. It is especially used in cement and power plants to collect samples from 300°C materials and flows of 5000 tons/hour.
Advantages and Equipment;
- It can be connected to the existing system from any point with its compact structure,
- Motor and pneumatic driven design according to the connection place,
- Insulation system preventing dusting,
- Capability of operation at 300°C temperature,
- IP65 protected panel,
- Automatic sampling at desired set values thanks to PLC system,
Profibus communication infrastructure.
|
| |